Plumbing problems are never fun, and it’s even less fun when you don’t know how to solve them yourself or where to get reliable plumbing services from. To help with that, we’ve put together this list of the most common plumbing problems and how to solve them, along with some suggestions on where to look if you need professional plumbers in your area.
1. Leaky Faucets
One of the most common plumbing problems is a leaky faucet. A leaky faucet can waste a lot of water and affect the surrounding surfaces. Wood shelves, cabinets, counters and floors are all at risk of warping, cracking or rotting from continuous water drips.
If you have a leaky faucet, there are a few things you can do to fix it. You can replace the washer, tighten the packing nut, or replace the O-ring. Of course, if you’re unsure how to do these things, you can always call a plumbing service.
2. Running Toilets
A running toilet is one of the most common bathroom plumbing problems. If you have a running toilet, you must call a plumbing service immediately. A running toilet wastes water and money, so it’s best to fix it as soon as possible.
There are many reasons why your toilet might be leaking; but the most common problem is due to an old flapper. First off, replace that old flapper with a new one (this may also involve replacing other broken parts). When finished replacing everything necessary for the flush mechanism, contact your plumber to come inspect your work and make sure there are no leaks left.
3. Slow Draining Sinks
A slow draining sink is one of the most common drain plumbing problems any homeowner could have. If your sink is draining slowly, there are a few things you can do to try to fix the problem. First, check the drain for any blockages. If there is a clog, you can use either a plunger or snake to remove it.
If you don’t have a clog, try using a sink strainer, many sinks rely on an additional piece that sits over the drain in order to help keep things from getting stuck.
However if it slips off or gets knocked out of place food particles may still get caught in your sink and eventually lead to clogs if they’re not dealt with right away.
4. Low Water Pressure
Another one of the most common plumbing problems is low water pressure. This can be caused by various factors, including sediment buildup in your pipes, the main water leak, or a faulty pressure regulator. If you’re experiencing low water pressure, there are a few things you can do to try and fix the problem.
First, check all your faucets to see if the problem is isolated to one or two. If it’s not, you will likely have a more significant issue. In this case, you should call a plumber right away. However, if it is only an isolated problem, turn off the faucet at the end furthest from where the water comes out so that only one tap has any pressure.
Then turn on another faucet for about 10 seconds to clear any blockages before turning it off again. Repeat this process until your desired pressure is restored.
5. Clogged Drains
Clogged drains can be a real pain. But, if you’re dealing with a clogged drain, there are a few things you can do to try to unclog the drain yourself.
First, try using a plunger. If that doesn’t work, try pouring hot water down the drain. You might also want to put some dish soap in the bowl or pot before doing this, so it creates suds in the sink or tub — the suds act as a lubricant for any hair or other material that may be blocking your pipes.
You’ll also want to check for items like soap bars, rags, towels, toys, or anything else that may have fallen into your drain and gotten stuck. If none of these methods work, it’s time to call a plumbing service.
6. Burst Pipes
Burst pipes are one of the most common problems homeowners have to deal with. They happen when water becomes frozen and expands, destroying the lines in its wake. If you have a burst pipe, turn off the water immediately and call a plumber.
Burst pipes can also be prevented by taking care to insulate your piping against freezing temperatures and letting faucets drip during the winter months. In addition to leaks caused by corrosion or rust buildup, other causes of burst pipes include clogs or improper installation methods.
Don’t wait until there’s an emergency — contact a licensed plumber before it gets too bad.
Plumbing Services in Dallas, Texas
As a homeowner, your bathroom and kitchen have a central role in your daily life. From your morning routine to nighttime rituals, it plays an essential part in the house. However, when it comes to something so important, homeowners cannot rely on DIY fixes for their pipes and plumbing; they need help from professional plumbing services who know how these things work best.
At Max Air, we are here for homeowners through all stages of repair to ensure everything is running smoothly. Contact us today to book a service appointment.