The indoor air that you breathe can be teeming with micro particles such as dust, smoke, and lint. In many homes, pet dander, mold, and bacteria, complicate the problem. In fact, 99% of the particles circulating in your home’s air are one micron and smaller – less than 1/40th the diameter of a human hair. These micro particles can aggravate your allergies, and irritate your respiratory system or simply make your home dusty and dirty.
How Often to Clean or Replace?
This can vary greatly. It can range from one to two months for most homes to every couple of weeks for some businesses. Don’t wait for the entire filter to become matted with dust. If most strands of fiberglass (or other material) are coated with dust, it’s time to replace it (or clean it, if applicable). Some filters clog more quickly than others.
What Size Filter?
As a general rule, you should have 1 1/2 square feet of filter for each ton of capacity. One square foot should be considered an absolute minimum.
How well a filter cleans the air depends on the filter, what is in the air and the airflow through the filter. Cleaning ability should be compared on the basis of standardized tests designed to test the filter’s efficiency on the size of particles important to you.
The different types of filters and descriptions:
Conventional 1″ fiberglass throwaway filters
Found in most residential and small commercial applications. Lowest first cost, but least effective. Many are coated with an adhesive substance to help collect dust. For this reason, this type of filter should not be cleaned in any way to “extend” its life. The dust and adhesive are both removed when cleaned, rendering the filter almost useless.
Conventional 2″ fiberglass throwaway filters
Commonly found in some commercial applications. Although it is twice as thick as a 1″ filter, it is not twice as efficient; it only holds more dust.
The same characteristic that makes a filter more efficient may require more blower power and could possibly overload your blower and reduce airflow through the system. Check with your service contractor before using nonstandard filters. Before purchasing any air filter, particularly “high efficiency” filters, be certain that it is properly sized for your system. Because “high efficiency filters” may have more resistance to airflow, they may have to be larger in square footage than standard types. Also, it doesn’t matter how efficient your filter is, if the air return duct is not thoroughly sealed against air leaks; unfiltered dirty air will enter the air stream. The dirtier or more restrictive the filter, the more air will come in the return leak. This air is often hot, humid, attic air, which increases the work of the air conditioner, decreases the comfort and increases your cost.
Pleated 1″ and 2″ fiberglass throwaway filters ( These are the most common types found in a home )
The 1″ version can be used in most residential and commercial applications. The fiberglass material is normally more densely woven to increase efficiency. Its pleated surface greatly increases dust collection area and thus extends its useful life.
Permanent mesh filters
These come in 1″ and 2″ versions and are made from different types of materials and consequently have a wide variety of effectiveness. Some of the older types such as aluminum mesh are no more effective than good fiberglass filters. These require the application of a filter adhesive spray after cleaning (washing) and drying. The filter adhesive should be available where you buy the filter.
These cleanable filters also come in 1″ and 2″ versions. Most filters advertised as allergy free are of this type. There are many different designs, and performance can vary. Some manufacturers claim very high efficiencies, but keep in mind that different manufacturers may use different tests to determine efficiencies. If the tests are not the same, the results may not be comparable. All electrostatic filter makers claim that the air movement through the filter creates a static charge that collects very tiny particles of dust. Like their “permanent” counterpart, electrostatic filters require frequent and thorough cleaning and may consume more blower power.
Cleanable permanent filters should be sturdily constructed of quality material and be easy to clean. It may be wise to see a demonstration of cleaning the filter before purchasing.
Electronic filters are always connected to an electrical power source. Although some versions can be installed into a standard wall-mounted filter grill, many require> installation into the air return duct. They usually come with a pre-filter, which collects the larger particles of dust and, therefore, reduces the frequency of cleaning the main filter cell. The pre-filter has to be cleaned about once a month, but the main filter may go as much as six months between cleanings. These are the most efficient, and most expensive, of all-residential filters.
Other specialized filters such as activated carbon for odor control are available. Feel free to ask us about your options if interested.
Filter installation is important. Many filters have arrows indicating the correct airflow direction. These filters should be installed so that the air will flow in the same direction as the arrow. If there is no arrow, the strongest part of the filter (often reinforced with metal grid) should be next to the air conditioning system so that the air exits at the reinforced part of the filter. Correctly installed, the filter should fit tightly and securely. If the filter does not stay in place during operation, it will not be effective.
The Minimum Efficiency Reporting Value, also known as MERV, measures the performance of air purifiers, specifically large purifiers intended to clean an entire house or building.
Whole house and building air purifiers usually receive MERV ratings of between 1 and 16, though the upper limit is sometimes extended to 20. Common residential air purification systems tend to fall within a narrower range. Higher numbers translate to more effective air filtration.
There really isn’t a brand we would recommend but we can get any size/type of filter you need as well as custom made filters.
Contact Max Air when it’s time to change your filters and for your HVAC seasonal maintenance.